Indicator Status
| Indicator Light | Status |
|---|---|
| Flashing slowly | Waiting WiFi connect |
| Flashing rapidly | Current network exception |
| Solids on | WiFi is connected |
Set-up The Cmera
- Scan to download the Smart Life App from the App Store or Google Play store.
- Launch Smart Life App, and register an account with a valid email address at the first use of Smart Life App, then log in.
- Connect the camera to power via included bulb base.
- Tap "Add Device", and then tap "Camera&Lock", and then tap "Smart Camera(Wi-Fi)".
- Hold on the reset button for 5s until hear a beep. Then Tap "Next".
- Enter password or tap the switch mark to switch Wi-Fi and enter password, and then tap "Next".
- Place the QR code on your phone in front of the camera until hear the "beep beep beep" prompt. Tap "I Heard a Prompt".
- Wait for the camera to connect until the connection is successful.
- Place the bulb camera into the position you want to install.
Frequently Asked Question
Ensure that you have entered the correct WiFi password. Put the camera closer to your router to ensure a strong WiFi signal. Change the encryption method of the WiFi network to WPA2-PSK/WPA-PSK. Change your WiFi SSID or password and make sure that SSID is within 31 characters and password is within 64 characters. It is recommended that scan the QR code and connect to WiFi before installing it outdoors.
Remove the protective film from the lens.
Wipe the camera lens with a dry paper/ towel/tissue.
Vary the distance between your camera and the mobile phone so that the camera can focus better.
Try to scan the QR code under sufficient. Lighting or turn up the brightness of your phone to avoid the influence of sunlight or other sources of light.